23 Apr 2014 
Support Center » Knowledgebase » Excursion PAT Relearn Procedure
 Excursion PAT Relearn Procedure
Solution Special notes for Diesel Excursion.

If you have a diesel excursion, there is a quicker way to reset the pats system.

THIS ENTIRE PROCEDURE IS CRITICAL Ensure this procedure is started with the key COMPLETELY OUT OF THE IGNITION

This technique will only work on the Ford Diesel Excursion

1) Ensure the key is OUT OF THE IGNITION to begin.
2) Insert the key into the ingition
3) Turn the key ON, DO NOT START THE VEHICLE.
4) Look at the Theft light on the dash, The theft light will be blinking rapidly... approx 3 blinks oer second, indicating theft.
5) After a period of 30-45 Seconds. Theft Light will blink slowly and/or go out.
6) Now, turn the key to the OFF position and remove it from the ignition. DO NOT TRY TO START THE VEHICLE.
7) Pause 10 seconds with key OUT of the ignition.
8) Insert key into the ignition.
9) Turn the key ON, but DO NOT START THE VEHICLE.
10)Look at the theft light on the dash, The Theft Light will be blinking slowly... 1 blink per second (normal mode)
11)After the wait to start light goes out, the customer can then crank and start the vehicle.


Article Details
Article ID: 49
Created On: 18 Feb 2010 12:08 PM

Posted By: wcboxlezc (pftbsn@kyyqvy.com) On: 29 Mar 2010 04:13 PM
pvcpRB <a href="http://ltvkzhdmiunq.com/">ltvkzhdmiunq</a>, [url=http://ayasgsiqdsfd.com/]ayasgsiqdsfd[/url], [link=http://ulhjncyvbksn.com/]ulhjncyvbksn[/link], http://szrejemyaafs.com/
Posted By: jim soehnlen (zbucknut7@aol.com) On: 18 Dec 2010 07:37 PM
is this done before or after you change a tune?
Posted By: Christopher Machine (bigmiba@aol.com) On: 14 Aug 2011 04:24 AM
This post is very useful for me, much appreciated! :)
 Back
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options
Home | Knowledgebase
Language:

SCT SupportSuite v3.20.02