09 Sep 2010 
Support Center » Knowledgebase » Livelink FAQs » How to Setup On Device Datalogging Using X3 / SF3.
 How to Setup On Device Datalogging Using X3 / SF3.
Solution Here is a walkthrough for datalogging on the device using the X3 or the SF3.

•Plug in the X3/SF3 to the vehicles OBD2 port.
•Scroll down to Data Logging, Press Select.
•Then Scroll down to Setup Monitor, Press Select.
•Config Analog Inputs? Select Yes or No, answering yes will allow you to connect a wideband or any other 0-5V component to the device analog input
•Pick Diesel or Gas, then press select.
•You are now ready to pick the pids.
oSelect them by highlighting them and then pressing select. You’ll notice that an Arrow will show next to the PID once selected.
oYou can select up to 20 Pids. NOTE: Default parameters are generated from a generic list of readable PCM parameters. It is possible that some pids shown will not be log able on your particular vehicle.
•Press Cancel to Exit from the list of Pids.
•This will bring you to a Save Data Configuration Menu.
oSelect – Save OK, Left – Back, Cancel – Exit
•Start Data Logging
oSelect – OK, Cancel – Exit
•A Message will display stating to make sure the vehicle is running, press Select to Start Recording.
•Once The Log has started, you can press LEFT/RIGHT arrows to view additional PIDS.
•Select will Stop Recording.
•Cancel will Exit the Log.

•You can Review this Log using a Computer with Livelink 4.24 or greater installed.
•Once 4.24 is installed and open…
•Then press: File/ Import Data log file from X3/livewire.
•A pop up box appears, Select Datalog0.dat from the list, then Press Ok.
•This will open and display the saved datalog.


Article Details
Article ID: 38
Created On: 25 Nov 2008 12:02 PM

 DID THIS HELP YOU? YOUR FEEDBACK IS IMPORTANT! Add a Comment
Posted By: Derek On: 21 Jun 2010 09:35 PM
So it says make sure the car is running. I thought we aren't supposed to start the car while the SCT is hooked up to the OBD II port?
Posted By: Matt On: 12 Mar 2010 06:11 PM
Yes, very helpful. Would be nice to have all the infomation for the decive (X3) in the users manual that comes with it. The users manual for the X3 is terrible, have you tried to use it, go ahead, print it out from your website and try to follow it. I still like my 5 Star tunned X3. Just the manual is bad. Thanks
 Back
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options
 Add Comment
 Print Article
 PDF Version
 Email Article
 Add to Favorites
Home | Knowledgebase | Troubleshooter
Language:

SCT SupportSuite v3.20.02