09 Sep 2010 
Support Center » Knowledgebase » How to Update the Firmware on an X2/SF 9415
 How to Update the Firmware on an X2/SF 9415
Solution FOLLOW THIS PROCESS TO UPDATE THE FIRMWARE ON X2's and SF 9415's.




  • To Update the Firmware, go to the SCT Tech Support page and click on Device Updates and Downloads

  • For Drop down 1 select the Ford Xcalibrator 2 - P/N: 9400, For Drop Down 2 Pick the Device Update Software

  • Click on "Click Here to Download" that is next to the Live Update 2 program.

  • Install this application, once installed plug in the X2 and the open the software you just installed.

  • Before proceeding, go back to the website, Under the Notes section, there is a link that says: "Click Here to Download the Firmware".

  • Click on this link and save this file to your desktop.

  • Once saved go back to the LiveUpdate Program, click on browse at the top right.

  • Browse to the desktop and locate the firmware file you saved, highlight it and click open.

  • When you get back to the liveupdate screen, click on OK, this will begin to transfer the firmware file and update the X2.

  • VERY IMPORTANT: DO NOT UNPLUG DURING UPDATE




Note: If you have custom tunes on your tuner, a firmware update will not erase them, pressing Erase Files however will erase all custom tunes.



Article Details
Article ID: 28
Created On: 20 Jun 2008 10:19 AM

 DID THIS HELP YOU? YOUR FEEDBACK IS IMPORTANT! Add a Comment
Posted By: Guillermo Esteves (guilloe@hotmail.com) On: 28 Jul 2008 09:24 PM
If the device has custom programs on it, when I made the upgrade,all this program will
be erase : yes or no.
GE.
Posted By: Steve Kirby On: 30 Apr 2009 04:12 PM
good directions
Posted By: jean marie linchet (cloturemjm@msn.com) On: 07 May 2009 09:24 AM
hello y use the sct 9415a for my mustang gt im the drag
my shift point are 6100 rpm y like too drop at 5800 rpm
is possible too tell me the proceess to do
or tell me the best set up
mustang gt 2004 auto + 3100 stal tork
3600 lbs
gear 3.90
slick 26x8.5x15 mt
nitrous 125 hp shoot
shift point 6100 too hy for my tork
y like too set at 5800 rpm

****Edit****
Your question has been sent to Tech Support.
 Back
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options
 Add Comment
 Print Article
 PDF Version
 Email Article
 Add to Favorites
Home | Knowledgebase | Troubleshooter
Language:

SCT SupportSuite v3.20.02