 | How to Update the Firmware on an X2/SF 9415 | |
 | FOLLOW THIS PROCESS TO UPDATE THE FIRMWARE ON X2's and SF 9415's.
To Update the Firmware, go to the SCT Tech Support page and click on Device Updates and Downloads
For Drop down 1 select the Ford Xcalibrator 2 - P/N |
|
|
| How do I unlock my tuner? | |
| If you have a locked tuner and want to know how to get it unlocked and your vehicle is available.
This is how you do it: (locate the section for your tuner below)
If the original vehicle that the programmer has been locked |
|
|
| What does the Error: 'Wrong Vehicle' mean? | |
| Error Wrong Vehicle:
If you are attempting to program a vehicle, and you receive the error: "Wrong Vehicle".
This means that the VIN stored on the tuner does not match the VIN of the vehicle.
Solutions:
S |
|
|
| Excursion PAT Relearn Procedure | |
| Special notes for Diesel Excursion.
If you have a diesel excursion, there is a quicker way to reset the pats system.
THIS ENTIRE PROCEDURE IS CRITICAL Ensure this procedure is started with the key COMPLETELY OUT OF THE IGNITION
This technique w |
|
|
| What does the Error: 'Wrong ECM Type' mean? | |
| Error Wrong ECM Type:
If you are attempting to program a vehicle, and you receive the error: "Wrong ECM Type".
This means that the VIN stored on the tuner does not match the VIN of the vehicle.
Solutions:
|
|
|
| What does the Error: 'No Index File Found' mean? | |
| Error No Index File Found:
If you are attempting to program a vehicle, and you receive the error: No Index File Found.
This means that there are no Tune Files loaded onto the tuner.
Solution:
Contact any of our custom t |
|
|
| What Does the Error: 'Loop Back Failed' Mean? | |
| Error Loop Back Failed when trying to Open Liveload 3 can be caused by a few different things.
• The X2/SF 9415 is Not Plugged In.
• The X2/SF 9415 is Not on the Main/Program Menu.
• The X2/SF 9415 has a Blank Blue Screen and Needs Re |
|
|
| How to figure out an Analog Wideband Formula. | |
| This is how you can figure out Analog Wideband Formulas.
The Wideband should have come with some sort of documentation. Use this to gather the info below, if it did not come with anything, you will need to call the manufacturer or search their w |
|
|
| What does the Error: 'This is Not a Valid Liveload File' Mean? | |
| WHAT DOES THE ERROR: ‘THIS IS NOT A VALID LIVELOAD FILE” MEAN?
Within Liveload 3, you may see the Error: “This is Not a Valid Liveload Liveload File”, below are possible causes/solutions.
o First thing to do is to check the version of L |
|
|
| How to Convert an SF 9415 to a 9400 Custom Tuner. | |
| NOTE: THIS IS NOT REVERSABLE WITHOUT SENDING IT IN AND PAYING A RE-LOADING FEE, ONCE CONVERTED, THE PRE-LOADED TUNES WILL BE GONE.
o Go to our Tech Support page, click on Device Updates and Downloads. For drop down 1, pick the X2 Ford - P/N 9400 |
|
|
| How to Save a Copy of Stock File. | |
| HERE ARE INSTRUCTIONS FOR SAVING A COPY OF YOUR STOCK FILE, LOCATE THE TUNER YOU ARE USING AND FOLLOW DIRECTIONS LISTED:
FOR THE FORD X3 3000, SF3 3015, GM SF3 3100, LIVEWIRE 9600, 9621, 9623, and 9625:
INSTALL THE SOFTWARE |
|
|
| How to Reset Changes. | |
| SCT Tuners Lock to the Vin of a single vehicle. You cannot use the tuner on a second vehicle until the original vehicle has been returned to stock. The tuners come with 5 changes (DCX Tuners 3 Changes); Each time you return a vehicle to stock, and pr |
|
|
| How Do I Check for Engine Codes? | |
| Reading & Clearing Diagnostic Trouble Codes.
This menu allows you to read and clear diagnostic trouble codes found in the vehicle PCM. This menu also allows you to read the vehicle strategy for custom tuning. If a "Check Engine" light or Service lig |
|
|
| Index is Outside the Bounds of Array | |
| If you receive the Error: "Index is Outside the Bounds of Arrary" when attempting to load Custom Tunes...
This is most commonly caused by the file being corrupted during upload or download from email.
First try re-downloading the |
|
|
| Error MSCOREE.DLL Not Found | |
| If you receive error mscoree.dll not found when attempting to install an SCT software application...
This error indicates that your computer does not have Microsoft's .Net Framework Installed.
This application must be installed on |
|
|
| How to load custom tunes on your SCT Ford X2 device. | |
| FOR THE FORD X2 9400:
Installing the Software, if already installed skip to the next step
• Make sure the device is not plugged in.
• Go to your Email, and save the tune files that were sent to you. For the location |
|
|
