Livelink Demo

Article Details

URL:	http://www.sctflash.com/support/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=32
Article ID:	32
Created On:	23 Jun 2008 02:48 PM

Answer

Here is a link to a Livelink Demo: LIVE LINK DEMO

With livelink, there are a few things that need to be correct then everything else will fall into place.

First and most important thing, make sure the drivers for the device you are using to data log are installed and properly working. (see related drivers documents for more on this)

Second, make sure you are using an up to date version of livelink. (this can be found on our website under Tech Support / Add-On Software and Utilities)

Third and equally as important is the order of events.
1. Plug in tuner to the vehicle's OBD2.
2. Plug in the usb cable to the laptop.
3. Turn the vehicle's key to the on position. (Skipping this step is the most common problem)
4. Open the Livelink software.
5. Press the Graph Button located at the top left.

It will then detect the vehicle and populate the list of pids to select. Put check marks in the pids you want to monitor, make sure to not select over 20 or so, or it will cause communication problems. Press OK, Then start the car, then press the Green button to begin logging.