SCT Device User Manuals
 
SCT Performance Products Device Updates & Downloads
The following updates were located for your SCT SF3 Power Flash Ford Programmer:
SF3 Ford Quick Overview
  • The SF3 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded performance or fuel economy tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle's OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the SF3 programs your vehicle.
Newest Firmware Version:    1.2.158-3015
Newest Tune Revision Version:    2.092PFDUS - Full Version
Newest Update Software Version:    2.9.8.91

 
 
SCT SF3 Power Flash Ford Programmer Device Firmware
Firmware Version: 1.2.158-3015 Release Date: 04-14-2014
Description: This is the latest firmware release for the SF3 Flash Device. This firmware is ONLY for SF3 Devices sold after July 25th, 2008.

Changes in this release:

- Added 2013-2014 F-Series Super Duty 6.7L (Custom Tune Only)

- Added 2013-2014 Fusion 2.0L (Custom and Pre-loaded)

SCT will no longer be providing the firmware files as a downloadable link from our website. In order to update to this firmware and any future firmware, please download and install the latest SCT SF3 Power Flash Ford Programmer Device Update Software below. Within this program, select to Automatically Check for Updates while connected to the internet and your device will be updated automatically. The tune revision update will take approximately 5 minutes for completion.
Notes: This firmware is ONLY for Enhanced SF3 devices. (your device serial number starts with "XP")
Links:

SCT SF3 Power Flash Ford Programmer Device Tune Revision
Tune Revision Version: 2.092PFDUS - Full Version Release Date: 04-22-2014
Description: The SF3 Tune Revision Update is used to update the preinstalled tunes on the SCT SF3. If you have purchased a SF3 that does not recognize your vehicle, this update may resolve the problem.

SCT will no longer be providing the tune revision files as a downloadable link from our website. In order to update to this tune revision and any future tune revisions, please download and install the latest SCT SF3 Power Flash Ford Programmer Device Update Software below. Within this program, select to Automatically Check for Updates while connected to the internet and your device will be updated automatically. The tune revision update will take approximately 5 minutes for completion.

Notes: Devices Affected:
SF3 Enhanced 3015

Changes in this revision:

- Added BBK Throttle Body, Long Tune Headers and Cold Air Intake for 2005-2010 4.6L 3v Mustangs
- Added BBK Throttle Body, Long Tune Headers and Cold Air Intake for 2011-2014 5.0L 4v Mustangs

Do not update this tune revision if the device was originally supplied by a Supercharger Manufacturer in a Supercharging Kit/System.

Links: View Installation Instructions

SCT SF3 Power Flash Ford Programmer Device Update Software
Version: 2.9.8.91 Release Date: 07-15-2014
Description: The Device Update Software is used to update your devices Firmware, Tune Revision or to load Custom Tunes (LL3 / CEF files) onto your device.
Notes: This software now features an option to auto-update your SCT Enhanced Device. If you are updating one of these devices, there is no need to download firmware or the tune revision.

Changes included in this version:
- Resolved minor GM issues
- Improved Livewire TS / iTSX Support

NOTE: If you already have version 2.9.7.23 or higher installed on your computer, open the Updater Software and select 'Yes' when prompted to update the software. This will reduce the amount of time taken to install the software.

If you are having issues with your custom tune files currently, you will need to reload the custom tune files into your device after following the auto-update process
 

SCT SF3 Power Flash Ford Programmer NEW! Live Link GEN II Data Logging Software
Version: 2.2.14.0 Release Date: 12-09-2013
Description: SCT's Live Link Datalogging Software is used to view / data log / record & playback your vehicles PCM data on a laptop computer.
Notes:
New features in this version include:

- * DCX support (1996-2012)
- Updated database including new SAE PIDs and GM EPIDs
- OSC (output state control) with GM X3P devices
- Non-rapid packet logging for X3P devices
- Ford Fiesta and Focus support
- New default Gauges style
- Unit conversion tool

* DCX Support is currently ONLY available on SCT DCX X3 Power Flash Devices (PN: 3200)
 

SCT Aftermarket EGT Kit Wiring Diagrams
Description: SCT Aftermarket EGT Kit Wiring Diagrams
Notes:
SCT Exhaust Gas Temperature wiring diagrams for popular EGT kits & SCT devices

SCT E-Mail List
E-Mail Address: