RELEASE ANNOUNCEMENT - 2012 FOCUS NA CUSTOM TUNING & FLASH PROGRAMMING SUPPORT
SCT Performance has been busy testing the 2012 Focus NA! This little pocket rocket comes from the factory equipped with a 2.0L engine that really pumps out the Horsepower / Torque, but stock just doesn't cut it at SCT.
SCT 2012 FOCUS SE 2.0L Test Vehicle:
Modifications: Steeda Cold Air Intake, Magnaflow Cat-Back Exhaust System
Factory Rated: 160 HP / 146 ft-lbs TQ (@ Flywheel)
Stock - 87 Octane Dyno Pull *: 160.38 FWHP / 151.13 ft-lbs FWTQ
SCT Custom Tuned - 93 Octane Dyno Pull *: 177.15 FWHP / 163.11 ft-lbs FWTQ
Horsepower / Torque Gain: 16.77 FWHP / 11.98 ft-lbs FWTQ at the Wheels
* All testing completed on a modified vehicle with above described modifications
  2012 FOCUS SE STOCK 87 OCTANE vs. SCT 93 OCTANE CUSTOM TUNED DYNO SHEET
Stock Dyno Sheet vs SCT Custom Tuned
  AVAILABLE NOW FOR 2012 FOCUS NA 2.0L WITH MANUAL TRANSMISSIONS
SCT Advantage III Custom Tuning Support:
Custom tuning support for the 2012 Focus NA (2.0L Manual Transmission ONLY) is available now in SCT's Advantage III Custom Tuning Software. Support for the 2012 Focus NA (Automatic Transmission) is in the final stages of development and will require owners to "Read" the vehicle's Engine / Tranmission part numbers using an SCT device, in the Vehicle Info screen. This info should be submited to SCT using the Automatic Focus Submission form found on our website. Click Here to Submit an Engine / Part Number combination.
SCT Device Support:
Vehicle flashing support is currently supported on SCT's X3 Power Flash Programmers running Firmware Revision 1.2.154. Support on other SCT devices will be added as testing & implementation is completed.
 
SCT Performance, LLC 4150 Church Street Suite 1024 Sanford Florida 32771